1. Battery Drainage – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: One common issue faced by owners of the Cube – The Supreme Sport Hybrid ONE 400 is unexpected battery drainage.
• Cause of the problem: The battery drainage can occur due to several reasons, including leaving the e-bike unused for extended periods, using high power settings excessively, or potential faults in the battery system.
• Troubleshooting step-by-step:
  1. Start by ensuring that the e-bike is powered off when not in use to prevent unnecessary drainage.
  2. Monitor and regulate the use of high power settings, especially during long rides, to conserve battery power.
  3. If the issue persists, consider checking the battery connections for any loose connections or corrosion. Clean and tighten the connections if necessary.
  4. If troubleshooting steps do not resolve the problem, it may indicate a faulty battery or electrical system issue. In this case, contact a certified technician for further diagnosis and repair.

2. Brake Noise – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users experience unusual noises coming from the brakes of the Cube – The Supreme Sport Hybrid ONE 400.
• Cause of the problem: Brake noise can be caused by various factors, including contaminated brake pads, misalignment of brake components, or worn brake pads.
• Troubleshooting step-by-step:
  1. Start by inspecting the brake pads for any signs of contamination, such as oil or dirt buildup. Clean the brake pads and rotors thoroughly using a suitable brake cleaner.
  2. Check the alignment of the brake calipers and ensure that they are properly centered over the brake rotors. Adjust the calipers if necessary to correct any misalignment.
  3. If the brake pads appear worn, replace them with new ones to eliminate noise caused by worn-out pads.
  4. If the issue persists after troubleshooting steps, consider seeking assistance from a professional bike mechanic to diagnose and address any underlying issues with the brake system.

3. Display Malfunction – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users encounter issues with the display unit of the Cube – The Supreme Sport Hybrid ONE 400, such as flickering, freezing, or complete malfunction.
• Cause of the problem: Display malfunctions can occur due to various reasons, including loose connections, software glitches, or hardware defects.
• Troubleshooting step-by-step:
  1. Start by checking the connections between the display unit and the main electrical system of the e-bike. Ensure that all connections are secure and free from corrosion.
  2. If the display is powered by batteries, replace the batteries with fresh ones to rule out power-related issues.
  3. Try resetting the display unit by following the manufacturer’s instructions. This may help resolve any software glitches causing the malfunction.
  4. If troubleshooting steps do not resolve the issue, it may indicate a hardware defect in the display unit. In this case, contact the manufacturer for warranty support or seek assistance from a professional technician for repair or replacement.

4. Chain Slipping – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders experience chain slipping issues while riding the Cube – The Supreme Sport Hybrid ONE 400, leading to an inconsistent pedaling experience.
• Cause of the problem: Chain slipping can be caused by factors such as improper chain tension, worn drivetrain components, or misalignment of gears.
• Troubleshooting step-by-step:
  1. Start by inspecting the chain tension and ensure that it is within the manufacturer’s recommended range. Adjust the tension as needed to prevent excessive slack or tightness.
  2. Inspect the condition of the chain and cassette for any signs of wear, such as elongation or tooth wear. Replace worn components to prevent chain slipping issues.
  3. Check the alignment of the rear derailleur and gears to ensure that they are properly aligned. Misalignment can cause the chain to slip between gears during shifting.
  4. If the problem persists, consider lubricating the chain and drivetrain components with a suitable bicycle chain lubricant to improve smoothness and reduce friction.

5. Motor Overheating – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may encounter motor overheating issues during prolonged or demanding rides with the Cube – The Supreme Sport Hybrid ONE 400, leading to reduced performance or safety concerns.
• Cause of the problem: Motor overheating can occur due to factors such as excessive load on the motor, riding at high speeds for extended periods, or inadequate cooling airflow.
• Troubleshooting step-by-step:
  1. Start by reducing the load on the motor by using lower power assist levels or pedaling more actively to reduce strain on the motor.
  2. Avoid riding at excessively high speeds for prolonged periods, as this can generate excessive heat buildup in the motor. Maintain a moderate pace to prevent overheating.
  3. Ensure adequate airflow to the motor by avoiding covering or obstructing the motor vents with accessories or clothing. Allow sufficient cooling airflow to dissipate heat from the motor.
  4. If the motor continues to overheat despite troubleshooting steps, consider taking breaks during rides to allow the motor to cool down or consult a professional technician for further diagnosis and repair.

6. Squeaky Suspension – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may experience squeaking noises coming from the suspension components of the Cube – The Supreme Sport Hybrid ONE 400.
• Cause of the problem: Squeaky suspension can be caused by factors such as lack of lubrication, dirt or debris buildup, or worn suspension components.
• Troubleshooting step-by-step:
  1. Start by inspecting the suspension fork and shock for any signs of dirt or debris accumulation. Clean the suspension components thoroughly and apply lubricant to pivot points and seals.
  2. Check the suspension bolts and fasteners for proper torque and tighten if necessary to eliminate any looseness or play in the suspension system.
  3. If the issue persists, it may indicate worn suspension bushings or seals. Consider servicing or replacing the suspension components as needed to resolve the squeaking noise.

7. Loose Handlebars – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may notice that the handlebars of the Cube – The Supreme Sport Hybrid ONE 400 feel loose or wobbly while riding.
• Cause of the problem: Loose handlebars can be caused by improper tightening of the handlebar stem bolts, worn handlebar grips, or damaged handlebar components.
• Troubleshooting step-by-step:
  1. Start by checking the tightness of the handlebar stem bolts using an appropriate torque wrench. Ensure that the bolts are tightened to the manufacturer’s recommended torque specifications.
  2. Inspect the handlebar grips for any signs of wear or damage. Replace worn grips with new ones to improve grip and reduce handlebar movement.
  3. If the issue persists, consider inspecting the handlebar itself for any signs of damage or deformation. Replace the handlebar if necessary to eliminate handlebar wobble.

8. Gear Shifting Issues – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may experience difficulties with gear shifting on the Cube – The Supreme Sport Hybrid ONE 400, such as sluggish or inconsistent shifting.
• Cause of the problem: Gear shifting issues can be caused by factors such as cable tension misalignment, worn drivetrain components, or improper adjustment of the derailleur.
• Troubleshooting step-by-step:
  1. Start by checking the cable tension adjustment for the rear derailleur. Ensure that the cable tension is adjusted according to the manufacturer’s specifications to facilitate smooth and precise shifting.
  2. Inspect the condition of the chain and cassette for any signs of wear or damage. Replace worn components to improve shifting performance.
  3. Check the alignment of the rear derailleur and adjust if necessary to ensure proper indexing and alignment with the cassette gears.

9. Loose Pedals – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may encounter issues with loose pedals on the Cube – The Supreme Sport Hybrid ONE 400, leading to instability and potential safety concerns.
• Cause of the problem: Loose pedals can be caused by factors such as improper installation, worn pedal threads, or insufficient pedal retention mechanisms.
• Troubleshooting step-by-step:
  1. Start by inspecting the pedal threads and crank arms for any signs of damage or wear. Replace worn components or repair damaged threads as needed to ensure a secure fit.
  2. Check the pedal retention mechanisms, such as pedal washers or retention nuts, for proper installation and functionality. Tighten or replace any loose or damaged retention components.
  3. Ensure that the pedals are installed securely onto the crank arms using a pedal wrench or appropriate tool. Tighten the pedals to the manufacturer’s recommended torque specifications.

10. Loose Seatpost – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may experience issues with a loose seatpost on the Cube – The Supreme Sport Hybrid ONE 400, leading to instability and discomfort while riding.
• Cause of the problem: A loose seatpost can be caused by factors such as improper seatpost clamp adjustment, worn seatpost components, or insufficient seatpost insertion depth.
• Troubleshooting step-by-step:
  1. Start by inspecting the seatpost clamp for proper tightness and adjustment. Ensure that the clamp is tightened securely around the seatpost without over-tightening, which can damage the seatpost or frame.
  2. Check the seatpost for any signs of wear, deformation, or damage. Replace worn or damaged seatposts with a new one to ensure a secure fit.
  3. Ensure that the seatpost is inserted to the appropriate depth into the seat tube of the frame. Refer to the manufacturer’s specifications for proper insertion depth and adjust as needed.

11. Battery Not Charging – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may encounter issues with the battery not charging properly on the Cube – The Supreme Sport Hybrid ONE 400.
• Cause of the problem: The battery not charging can be caused by factors such as a faulty charger, damaged charging port, or issues with the battery management system.
• Troubleshooting step-by-step:
  1. Start by checking the charger and power outlet for proper functionality. Try using a different power outlet or charger to rule out issues with the charging equipment.
  2. Inspect the charging port on the e-bike for any signs of damage or debris accumulation. Clean the charging port carefully and ensure that it is not obstructed.
  3. If the problem persists, it may indicate a fault in the battery management system or battery itself. Contact the manufacturer or a certified technician for further diagnosis and repair.

12. Wheel Misalignment – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may notice wheel misalignment issues on the Cube – The Supreme Sport Hybrid ONE 400, leading to handling difficulties or uneven tire wear.
• Cause of the problem: Wheel misalignment can be caused by factors such as loose axle nuts, bent axles, or improper installation of wheels.
• Troubleshooting step-by-step:
  1. Start by checking the axle nuts on both wheels for proper tightness. Ensure that the nuts are tightened securely to the manufacturer’s recommended torque specifications.
  2. Inspect the axles for any signs of bending or damage. Replace bent axles with new ones to ensure proper wheel alignment and stability.
  3. If the issue persists, consider checking the wheel alignment using a suitable alignment tool or by consulting a professional bike mechanic for assistance.

13. Motor Noise – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may experience unusual noises coming from the motor of the Cube – The Supreme Sport Hybrid ONE 400, such as grinding, whining, or clicking sounds.
• Cause of the problem: Motor noise can be caused by factors such as worn bearings, loose components, or internal motor damage.
• Troubleshooting step-by-step:
  1. Start by inspecting the motor housing for any signs of damage or loose components. Tighten any loose screws or bolts and ensure that the motor housing is securely mounted.
  2. If the noise persists, it may indicate worn bearings within the motor. Contact the manufacturer or a certified technician for further diagnosis and repair.
  3. Consider lubricating the motor bearings if recommended by the manufacturer to reduce friction and noise. Use a suitable lubricant and follow the manufacturer’s instructions carefully.

14. Display Connectivity Issues – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may encounter issues with connectivity between the display unit and other electronic components of the Cube – The Supreme Sport Hybrid ONE 400.
• Cause of the problem: Display connectivity issues can be caused by factors such as loose connections, software glitches, or compatibility issues between components.
• Troubleshooting step-by-step:
  1. Start by checking the connections between the display unit and other electronic components, such as the motor controller or battery. Ensure that all connections are secure and free from corrosion.
  2. If the display unit is wirelessly connected to other components, ensure that the wireless signal is strong and uninterrupted. Consider moving closer to the connected components to improve connectivity.
  3. Try resetting the display unit and other electronic components to their factory settings to resolve any software glitches or compatibility issues. Follow the manufacturer’s instructions for resetting the components.

15. Excessive Motor Noise – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may experience excessive motor noise on the Cube – The Supreme Sport Hybrid ONE 400, which can be disruptive and indicate underlying issues.
• Cause of the problem: Excessive motor noise can be caused by factors such as loose motor mounts, worn gears, or internal motor damage.
• Troubleshooting step-by-step:
  1. Start by inspecting the motor mounts for proper tightness and adjustment. Ensure that the motor is securely mounted to the frame to reduce vibrations and noise.
  2. Check the gears within the motor for any signs of wear or damage. Replace worn gears or components to restore smooth operation and reduce noise.
  3. If the noise persists, it may indicate internal motor damage. Contact the manufacturer or a certified technician for further diagnosis and repair.

16. Braking Performance Issues – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may encounter issues with braking performance on the Cube – The Supreme Sport Hybrid ONE 400, such as reduced stopping power or brake squealing.
• Cause of the problem: Braking performance issues can be caused by factors such as worn brake pads, contaminated brake rotors, or air in the hydraulic brake system.
• Troubleshooting step-by-step:
  1. Start by inspecting the brake pads for wear and replace them if they are worn down beyond the recommended thickness. Ensure that the brake pads are properly aligned with the brake rotors.
  2. Clean the brake rotors with a suitable brake cleaner to remove any contaminants such as oil, dirt, or debris. Ensure that the brake rotors are free from residue that may affect braking performance.
  3. If the brake lever feels spongy or requires excessive lever travel, it may indicate air in the hydraulic brake system. Bleed the brake system according to the manufacturer’s instructions to remove air bubbles and restore proper brake performance.

17. Battery Drainage – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may notice excessive battery drainage on the Cube – The Supreme Sport Hybrid ONE 400, resulting in reduced range per charge.
• Cause of the problem: Battery drainage issues can be caused by factors such as high power consumption settings, battery age or degradation, or parasitic power draw from electronic components.
• Troubleshooting step-by-step:
  1. Start by reviewing the power consumption settings on the e-bike, such as pedal assist levels or throttle usage. Adjust the settings to lower power consumption modes to extend battery range.
  2. If the battery is older or shows signs of degradation, consider replacing it with a new one to restore full battery capacity and improve range per charge.
  3. Inspect electronic components such as lights, displays, or accessories for parasitic power draw. Turn off unnecessary components when not in use to conserve battery power.

18. Unresponsive Display – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may experience issues with an unresponsive display unit on the Cube – The Supreme Sport Hybrid ONE 400, where the display fails to turn on or respond to inputs.
• Cause of the problem: An unresponsive display can be caused by factors such as loose connections, software glitches, or a faulty display unit.
• Troubleshooting step-by-step:
  1. Start by checking the connections between the display unit and other electronic components. Ensure that all connections are secure and free from corrosion or damage.
  2. Try resetting the display unit to its factory settings to resolve any software glitches or issues with the display firmware. Follow the manufacturer’s instructions for resetting the display.
  3. If the display remains unresponsive, it may indicate a hardware fault with the display unit itself. Contact the manufacturer or a certified technician for further diagnosis and repair.

19. Chain Slippage – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may experience chain slippage issues on the Cube – The Supreme Sport Hybrid ONE 400, where the chain skips or jumps unexpectedly during pedaling.
• Cause of the problem: Chain slippage can be caused by factors such as a worn chain, misaligned drivetrain components, or insufficient chain tension.
• Troubleshooting step-by-step:
  1. Start by inspecting the chain for signs of wear or stretching. Replace the chain if it is worn beyond the manufacturer’s recommended limits to prevent further slippage issues.
  2. Check the alignment of the rear derailleur and cassette gears. Misaligned components can cause the chain to skip or jump during shifting. Adjust the derailleur as needed to ensure proper alignment.
  3. Ensure that the chain tension is adjusted properly. A loose chain can lead to slippage issues, especially under high torque loads. Adjust the chain tension using the derailleur or tensioning device.

20. Loose Bolts and Fasteners – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may encounter issues with loose bolts and fasteners on various components of the Cube – The Supreme Sport Hybrid ONE 400, leading to potential safety hazards and performance issues.
• Cause of the problem: Loose bolts and fasteners can be caused by factors such as inadequate tightening during assembly, vibration-induced loosening, or insufficient use of thread-locking compounds.
• Troubleshooting step-by-step:
  1. Perform a comprehensive inspection of all bolts and fasteners on the e-bike, including those on the frame, handlebars, stem, saddle, and components such as brakes and drivetrain.
  2. Tighten any loose bolts or fasteners using an appropriate torque wrench to the manufacturer’s recommended torque specifications. Pay particular attention to critical safety components such as stem and handlebar bolts.
  3. If bolts repeatedly come loose despite proper tightening, consider using thread-locking compounds such as Loctite to prevent vibration-induced loosening. Apply the thread-locking compound according to the manufacturer’s instructions.

21. Pedal Assist Sensor Malfunction – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may experience issues with the pedal assist sensor on the Cube – The Supreme Sport Hybrid ONE 400, where the assistance fails to engage or disengage properly.
• Cause of the problem: Pedal assist sensor malfunction can be caused by factors such as sensor misalignment, damaged wiring, or interference from external sources.
• Troubleshooting step-by-step:
  1. Inspect the pedal assist sensor and its alignment with the drivetrain components. Ensure that the sensor is properly aligned and positioned according to the manufacturer’s specifications.
  2. Check the wiring harness for any signs of damage or loose connections. Repair or replace damaged wiring as needed and ensure that all connections are secure.
  3. If the pedal assist sensor is affected by interference from external sources such as electromagnetic fields, try relocating the sensor or shielding it from the source of interference.

22. Erratic Motor Behavior – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may encounter erratic motor behavior on the Cube – The Supreme Sport Hybrid ONE 400, such as sudden surges or drops in power output.
• Cause of the problem: Erratic motor behavior can be caused by factors such as software glitches, sensor malfunctions, or issues with the motor controller.
• Troubleshooting step-by-step:
  1. Check for any error codes or warning lights on the display unit that may indicate a specific issue with the motor or controller. Refer to the manufacturer’s documentation for troubleshooting guidance based on error codes.
  2. Reset the motor controller to its factory settings to resolve any software glitches or configuration issues. Follow the manufacturer’s instructions for resetting the controller.
  3. If the problem persists, it may indicate a malfunctioning sensor or faulty motor controller. Contact the manufacturer or a certified technician for further diagnosis and repair.

23. Battery Overheating – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may notice excessive heat buildup in the battery compartment of the Cube – The Supreme Sport Hybrid ONE 400, indicating potential overheating issues.
• Cause of the problem: Battery overheating can be caused by factors such as high ambient temperatures, prolonged use at high power levels, or insufficient cooling airflow.
• Troubleshooting step-by-step:
  1. Stop riding the e-bike immediately if you notice signs of battery overheating, such as unusual warmth or bulging of the battery pack.
  2. Allow the battery to cool down in a well-ventilated area away from direct sunlight. Do not attempt to charge the battery until it has reached a safe temperature.
  3. Inspect the battery compartment and surrounding components for any obstructions or damage that may restrict airflow and contribute to overheating. Remove any debris or obstructions as needed.

24. Throttle Response Delay – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some users may experience delays in throttle response on the Cube – The Supreme Sport Hybrid ONE 400, where the motor does not immediately engage or respond to throttle inputs.
• Cause of the problem: Throttle response delays can be caused by factors such as software lag, throttle sensor malfunctions, or issues with the motor controller.
• Troubleshooting step-by-step:
  1. Check for any debris or obstructions around the throttle mechanism that may impede its movement or cause erratic behavior. Clean the throttle assembly and ensure that it operates smoothly.
  2. Reset the throttle sensor to its factory settings to eliminate any calibration issues or software glitches. Follow the manufacturer’s instructions for resetting the throttle sensor.
  3. If the problem persists, it may indicate a fault in the motor controller or throttle circuitry. Contact the manufacturer or a certified technician for further diagnosis and repair.

25. Display Error Messages – Cube – The Supreme Sport Hybrid ONE 400

• Description of the problem: Some riders may encounter error messages or warning codes on the display unit of the Cube – The Supreme Sport Hybrid ONE 400, indicating potential system faults or malfunctions.
• Cause of the problem: Display error messages can be caused by factors such as sensor failures, communication errors between components, or software bugs.
• Troubleshooting step-by-step:
  1. Take note of the specific error message or code displayed on the screen and consult the manufacturer’s documentation or support resources for troubleshooting guidance.
  2. Attempt to reset the display unit to its factory settings to clear any temporary software glitches or configuration issues. Follow the manufacturer’s instructions for resetting the display.
  3. If the error message persists or is accompanied by abnormal behavior in the e-bike’s operation, it may indicate a more serious fault requiring professional diagnosis and repair. Contact the manufacturer or a certified technician for assistance.

Cube – The Supreme Sport Hybrid ONE 400 Electric Bike User Reviews

Welcome to the user reviews section for the Cube – The Supreme Sport Hybrid ONE 400 electric bike. Here, we’ll delve into the experiences and feedback shared by riders who have had the opportunity to test out this innovative e-bike. From performance to comfort, let’s explore what users have to say about the Cube – The Supreme Sport Hybrid ONE 400.

Positive Reviews from Cube – The Supreme Sport Hybrid ONE 400 Users

• Many users were satisfied with the enhanced cooling provided by the hydraulic disc brakes. The 180mm rotors front and rear not only ensure better stopping power but also contribute to consistent performance even on long rides.
• Several riders praised the quality drivetrain of the Cube – The Supreme Sport Hybrid ONE 400. Despite being a 9-speed system, the Shimano components were commended for their lightweight, durability, and reliability, making them perfectly suited for daily biking needs.
• A common positive experience shared by users was the convenience of being able to charge the battery on or off the bike. Coupled with the 4 AMP charger, riders appreciated the faster charging times, allowing for minimal downtime and extended riding sessions.
• Many users highlighted the strength and balance provided by the 36 spoke setup of the bike, particularly beneficial for its heavier build. This feature ensures stability and durability, contributing to a confident and comfortable riding experience.
• Riders of various heights appreciated the availability of four frame sizes, allowing them to find the perfect fit for their individual preferences. This customization option ensures a comfortable and personalized riding experience for all users.

In conclusion, the positive feedback from Cube – The Supreme Sport Hybrid ONE 400 users underscores its reputation as a reliable and high-performance electric bike. From its superior cooling and quality drivetrain to its convenient charging options and customizable frame sizes, riders have consistently praised the bike’s performance and comfort. These positive reviews highlight the Cube – The Supreme Sport Hybrid ONE 400 as a top choice for those seeking an exceptional e-bike experience.

Negative User Reviews of the Cube – The Supreme Sport Hybrid ONE 400

• Some users were not satisfied with the headlight’s placement on the arch of the suspension fork, which led to bouncing and reduced visibility, especially on uneven terrain.
• Several users expressed disappointment with the PowerTube 400 battery capacity, considering it insufficient for the high power consumption of the Bosch Performance Line motor. Upgrading the battery was deemed necessary for longer rides.
• Many users found the Purion interface lacking essential features and functionality, such as indicating max speed, average speed, power output, clock, or shifting recommendation. Its small and limited display made it difficult to monitor important metrics during rides.
• Some users encountered issues with the kickstand position, which tended to block the left crank arm when pedaling backward, resulting in “pedal lock” and disrupting the riding experience.

Overall, while there were some concerns raised by users regarding certain aspects of the Cube – The Supreme Sport Hybrid ONE 400, the majority of customers were satisfied with its performance, comfort, and features. These negative reviews highlight specific areas for improvement, but they do not overshadow the overall positive feedback received for the e-bike.

Cube – The Supreme Sport Hybrid ONE 400 Manual

The operating instructions for the Cube – The Supreme Sport Hybrid ONE 400 can be found on the manufacturer’s website. For detailed guidance on how to operate and maintain your e-bike, please visit the manufacturer’s website and refer to the manual provided.

Conclusion

Overall Impressions:

After delving into the various aspects of the Cube – The Supreme Sport Hybrid ONE 400 electric bike, it’s evident that this model offers a compelling blend of performance, comfort, and convenience. From its robust construction to its innovative features, the Cube – The Supreme Sport Hybrid ONE 400 caters to the diverse needs of riders, whether they’re commuting through city streets or exploring off-road trails.

Positive Aspects:

The positive user reviews highlighted the bike’s superior cooling system, quality drivetrain, convenient charging options, and thoughtful construction. These features contribute to a comfortable and enjoyable riding experience, making the Cube – The Supreme Sport Hybrid ONE 400 a top choice among electric bike enthusiasts.

Negative Aspects:

While some users raised concerns about certain aspects such as the headlight placement, battery capacity, interface limitations, and kickstand position, these issues were outweighed by the overall positive feedback received for the e-bike. These areas for improvement provide valuable insights for potential enhancements in future iterations of the Cube – The Supreme Sport Hybrid ONE 400.

Conclusion:

In conclusion, the Cube – The Supreme Sport Hybrid ONE 400 emerges as a standout option in the electric bike market, offering a winning combination of performance, comfort, and convenience. With its impressive features and overall positive user feedback, it’s clear that this e-bike is well-suited for riders seeking a reliable and enjoyable cycling experience.

Cube – The Supreme Sport Hybrid ONE 400 FAQ

Does the Cube Supreme Sport Hybrid ONE 400 come in different frame sizes?

Yes, the Cube Supreme Sport Hybrid ONE 400 is available in four different frame sizes.

What is the maximum range of the Cube Supreme Sport Hybrid ONE 400?

The Cube Supreme Sport Hybrid ONE 400 has a maximum range of up to 145 kilometers.

Can I charge the battery of the Cube Supreme Sport Hybrid ONE 400 while it’s on the bike?

Yes, the battery of the Cube Supreme Sport Hybrid ONE 400 can be charged either on or off the bike.

Is there an issue with the kickstand on the Cube Supreme Sport Hybrid ONE 400?

Yes, if the kickstand is not adjusted correctly, it can block the left crank arm when pedaling backward, causing ‘pedal lock.’

What is the motor used in the Cube Supreme Sport Hybrid ONE 400?

The Cube Supreme Sport Hybrid ONE 400 uses a Bosch Performance Line Cruise motor.

What are the drawbacks of the Purion display on the Cube Supreme Sport Hybrid ONE 400?

The Purion display on the Cube Supreme Sport Hybrid ONE 400 is not removable, lacks indications like max speed and average speed, has a limited readout, and cannot charge or connect to smartphones.

What type of brakes does the Cube Supreme Sport Hybrid ONE 400 have?

The Cube Supreme Sport Hybrid ONE 400 is equipped with hydraulic disc brakes.

What is the battery capacity of the Cube Supreme Sport Hybrid ONE 400?

The Cube Supreme Sport Hybrid ONE 400 comes with the PowerTube 400, which is the lowest capacity battery from Bosch.

What kind of lights does the Cube Supreme Sport Hybrid ONE 400 have?

The Cube Supreme Sport Hybrid ONE 400 is equipped with a high-quality headlight and rear light. The rear light is even integrated into the fender.

Cube – The Nuride Hybrid Performance 625 Common Problems and Troubleshooting
Cube – Reaction Hybrid Performance Common Problems and Troubleshooting
Cyrusher Nitro Common Problems and Troubleshooting