Orbea Rise H10 Common Problems

Specifications

Features

• Lightweight aluminum frame
• 29-inch wheels
• Impressive suspension travel
• Shimano EP8-RS motor with Orbea tune
• Option of 360 Wh or 540 Wh battery
• Optional 252 Wh range extender
• 12×148 boost rear hub spacing
• Internal cable routing
• Tapered headtube
• Fox 34 Float Factory 140 fork
• Shimano Deore brakes

Causes of Common Problems with the Orbea Rise H10

In this section, we will explore the potential causes behind common problems encountered with the Orbea Rise H10 e-bike.

Stay tuned as we delve into solutions and troubleshooting methods to address these issues effectively.

Motor Overheating – Orbea Rise H10

• Description of the problem: One common issue with the Orbea Rise H10 e-bike is motor overheating, which can result in reduced performance and potential damage to the motor components.
• Cause of the problem: Motor overheating can occur due to prolonged usage at high power levels or in hot weather conditions, causing the motor to exceed its optimal operating temperature.
• Troubleshooting step-by-step:
  1. Stop riding the bike immediately if you notice signs of motor overheating, such as reduced power output or unusual noises.
  2. Allow the motor to cool down by turning off the e-bike and letting it rest in a shaded area for at least 15-20 minutes.
  3. Inspect the motor and surrounding components for any debris or obstructions that may be blocking airflow and contributing to overheating.
  4. If the problem persists, consult with a certified bike mechanic or Orbea service center for further diagnosis and repair.

Battery Drainage – Orbea Rise H10

• Description of the problem: Another common issue faced by Orbea Rise H10 owners is unexpected battery drainage, leading to shortened riding range and potential inconvenience during rides.
• Cause of the problem: Battery drainage can occur due to various factors, including extended periods of inactivity, improper charging habits, or battery aging and degradation over time.
• Troubleshooting step-by-step:
  1. Check the battery connections and ensure they are securely fastened to the e-bike’s electrical system.
  2. Verify that the battery is fully charged before each ride and consider using a compatible charger recommended by Orbea.
  3. If experiencing rapid battery drainage, reset the battery management system by fully discharging and recharging the battery several times to recalibrate its capacity.
  4. If the issue persists, contact Orbea customer support for assistance in diagnosing and resolving the battery drainage problem.

Brake Squeaking – Orbea Rise H10

• Description of the problem: Some riders may encounter brake squeaking issues with their Orbea Rise H10, resulting in annoying noises during braking maneuvers.
• Cause of the problem: Brake squeaking can be caused by contaminants on the brake pads or rotor surfaces, improper alignment of brake components, or worn brake pads.
• Troubleshooting step-by-step:
  1. Inspect the brake pads and rotor surfaces for any signs of dirt, oil, or debris buildup and clean them thoroughly using an appropriate brake cleaner solution.
  2. Ensure that the brake calipers are properly aligned with the rotor and adjust as necessary to minimize friction and noise.
  3. If brake pads are worn beyond their usable lifespan, replace them with new pads compatible with the Orbea Rise H10 model.
  4. If brake squeaking persists despite cleaning and alignment efforts, consult with a professional bike mechanic for further diagnosis and potential brake system adjustments or repairs.

Frame Creaking – Orbea Rise H10

• Description of the problem: Another issue reported by some Orbea Rise H10 riders is frame creaking noises, particularly during pedaling or when encountering rough terrain.
• Cause of the problem: Frame creaking can occur due to various factors, including loose or improperly tightened frame bolts, worn bushings or bearings, or frame flex under load.
• Troubleshooting step-by-step:
  1. Inspect all frame bolts and connections for tightness and torque them to the manufacturer’s recommended specifications using a torque wrench.
  2. Check suspension components, such as bushings and bearings, for signs of wear or damage and replace them if necessary to eliminate creaking noises.
  3. If frame flex is suspected as the cause, consider reinforcing or stiffening certain areas of the frame using aftermarket solutions or consulting with a bike frame specialist for advice.
  4. If creaking persists, especially under load, seek assistance from a professional bike mechanic or Orbea service center to diagnose and address the underlying issue.

Electrical System Malfunction – Orbea Rise H10

• Description of the problem: Lastly, some Orbea Rise H10 owners may experience electrical system malfunctions, such as intermittent power loss, error codes on the display, or unresponsive controls.
• Cause of the problem: Electrical system malfunctions can be caused by various factors, including loose or damaged electrical connections, software glitches, or sensor failures.
• Troubleshooting step-by-step:
  1. Inspect all electrical connections, including battery terminals, motor connections, and display connections, for signs of corrosion, damage, or looseness, and secure them properly.
  2. Update the e-bike’s firmware and software to the latest versions provided by Orbea, as software glitches and bugs may be resolved through updates.
  3. Perform a system reset by turning off the e-bike, disconnecting the battery, waiting for a few minutes, and then reconnecting the battery and powering on the bike to reset the electrical system.
  4. If electrical issues persist, contact Orbea customer support or seek assistance from a certified bike mechanic familiar with electric bike systems for further diagnosis and repair.

Chain Slippage – Orbea Rise H10

• Description of the problem: Chain slippage is a common issue where the chain unexpectedly skips or slips off the drivetrain components, causing loss of power and potential safety hazards.
• Cause of the problem: Chain slippage can be caused by several factors, including worn chainrings or cassette, improper chain tension, or misalignment of the drivetrain components.
• Troubleshooting step-by-step:
  1. Inspect the chain, chainrings, and cassette for signs of wear or damage, such as worn teeth or stretched chain links, and replace any worn components accordingly.
  2. Adjust the chain tension by loosening the rear wheel axle nuts or using the tension adjustment screws on the rear derailleur to achieve proper tension without excessive slack.
  3. Ensure proper alignment of the chain and drivetrain components by checking the chainline and adjusting as necessary using the front and rear derailleur adjustment screws.
  4. If chain slippage persists, consider upgrading to a higher-quality chain or drivetrain components to improve performance and reliability.

Suspension Fork Issues – Orbea Rise H10

• Description of the problem: Some riders may experience issues with the suspension fork on their Orbea Rise H10, such as sagging, harshness, or lack of rebound damping.
• Cause of the problem: Suspension fork issues can occur due to various factors, including improper setup, lack of maintenance, or worn suspension components.
• Troubleshooting step-by-step:
  1. Check the suspension fork settings, including preload, compression, and rebound damping, and adjust them according to your riding preferences and terrain conditions.
  2. Inspect the fork seals and stanchions for any signs of damage, oil leaks, or dirt buildup, and clean or replace them as necessary to restore proper function.
  3. Perform regular maintenance tasks, such as lubricating the fork seals and bushings, checking air pressure, and inspecting for worn or damaged components.
  4. If suspension issues persist, consult with a professional bike mechanic or suspension specialist for a thorough inspection and potential servicing or repair of the suspension fork.

Loose Handlebars or Stem – Orbea Rise H10

• Description of the problem: Loose handlebars or stem can pose a serious safety risk for riders, causing loss of control and potential accidents while riding the Orbea Rise H10.
• Cause of the problem: Handlebars or stem may become loose due to inadequate tightening, worn components, or improper installation.
• Troubleshooting step-by-step:
  1. Check the handlebar clamp bolts and stem bolts for proper tightness using a torque wrench and tighten them to the manufacturer’s recommended specifications.
  2. Inspect the handlebar and stem for any signs of damage or wear, such as cracks, dents, or corrosion, and replace any worn components as necessary.
  3. Ensure proper installation of the handlebar and stem by aligning them with the front wheel and tightening the bolts evenly and securely.
  4. If handlebar or stem issues persist, seek assistance from a professional bike mechanic for further inspection and proper adjustment or replacement of components.

Noise from Bottom Bracket – Orbea Rise H10

• Description of the problem: Riders may encounter noise coming from the bottom bracket area of their Orbea Rise H10, manifesting as creaking, clicking, or grinding sounds.
• Cause of the problem: Bottom bracket noise can be caused by various factors, including worn bearings, loose crank arms, or contamination in the bottom bracket area.
• Troubleshooting step-by-step:
  1. Inspect the bottom bracket area for any signs of contamination, such as dirt, water, or debris, and clean the area thoroughly to eliminate potential sources of noise.
  2. Check the bottom bracket bearings for smooth operation and replace them if they are worn or damaged, ensuring proper adjustment and preload.
  3. Tighten the crank arms securely onto the bottom bracket spindle using a crank arm puller tool and torque wrench to eliminate any play or movement that may cause noise.
  4. If bottom bracket noise persists, consult with a professional bike mechanic for further diagnosis and potential replacement of bottom bracket components.

Display Malfunction – Orbea Rise H10

• Description of the problem: Display malfunction is another potential issue faced by Orbea Rise H10 riders, involving issues such as screen freezing, incorrect readings, or unresponsive controls.
• Cause of the problem: Display malfunction can occur due to software glitches, loose connections, or damage to the display unit.
• Troubleshooting step-by-step:
  1. Reset the display unit by turning off the e-bike, disconnecting the display unit from its mount, and reconnecting it after a few minutes to reboot the system.
  2. Update the display unit’s firmware to the latest version provided by Orbea, as software updates may address known issues and improve overall functionality.
  3. Inspect the display unit connections for any signs of looseness or damage and ensure they are securely fastened to the e-bike’s electrical system.
  4. If display issues persist, contact Orbea customer support for further assistance and potential replacement of the display unit if deemed necessary.

Battery Not Charging – Orbea Rise H10

• Description of the problem: Some users may encounter issues where the battery of their Orbea Rise H10 does not charge properly or at all.
• Cause of the problem: This problem can be caused by a faulty charger, damaged charging port on the e-bike, or issues with the battery management system.
• Troubleshooting step-by-step:
  1. Check the charger for any visible damage or signs of malfunction and try using a different power outlet to rule out issues with the power source.
  2. Inspect the charging port on the e-bike for any debris or damage and clean it carefully with compressed air or a soft brush if necessary.
  3. If possible, try charging the battery using a different compatible charger to determine if the issue lies with the charger or the e-bike.
  4. If the battery still does not charge, contact Orbea customer support or a certified bike mechanic for further diagnosis and repair.

Display Malfunction – Orbea Rise H10

• Description of the problem: Some riders may experience issues with the display unit on their Orbea Rise H10, such as flickering, blank screens, or incorrect readings.
• Cause of the problem: Display malfunctions can occur due to loose connections, water damage, software glitches, or physical damage to the display unit.
• Troubleshooting step-by-step:
  1. Ensure all connections between the display unit and the e-bike’s electrical system are secure and properly seated.
  2. If the display unit has been exposed to water, allow it to dry thoroughly and avoid using the e-bike until the display unit is completely dry to prevent further damage.
  3. Update the display unit’s firmware to the latest version provided by Orbea, as software glitches may be resolved through updates.
  4. If the display unit continues to malfunction, consider replacing it with a new unit or seek assistance from a professional bike mechanic for further diagnosis and repair.

Noisy Chain – Orbea Rise H10

• Description of the problem: Some riders may notice excessive noise coming from the chain of their Orbea Rise H10, particularly during gear changes or pedaling.
• Cause of the problem: Noisy chains can result from improper lubrication, misalignment of drivetrain components, or worn chain and cassette.
• Troubleshooting step-by-step:
  1. Clean the chain thoroughly with a degreaser and re-lubricate it with a high-quality bicycle chain lubricant, ensuring proper coverage and excess lubricant removal.
  2. Check for any signs of wear or damage on the chain and cassette teeth, and replace them if necessary to eliminate noise and improve shifting performance.
  3. Inspect the derailleur and rear derailleur hanger for proper alignment and adjustment, as misalignment can contribute to chain noise.
  4. If the problem persists, seek assistance from a certified bike mechanic to diagnose and address the underlying cause of the noisy chain.

Pedal Assist Not Working – Orbea Rise H10

• Description of the problem: Some users may encounter issues where the pedal assist system of their Orbea Rise H10 does not engage or function properly.
• Cause of the problem: This problem can be caused by sensor malfunctions, electrical wiring issues, or software glitches in the pedal assist system.
• Troubleshooting step-by-step:
  1. Check the pedal assist sensor and magnet alignment to ensure they are properly positioned and functioning correctly.
  2. Inspect the electrical wiring and connections related to the pedal assist system for any signs of damage, corrosion, or loose connections.
  3. Reset the pedal assist system by turning off the e-bike, disconnecting the battery, waiting for a few minutes, and then reconnecting the battery and powering on the bike.
  4. If the pedal assist still does not work, consult with Orbea customer support or a certified bike mechanic for further diagnosis and repair.

Wheel Alignment Issues – Orbea Rise H10

• Description of the problem: Some riders may experience issues with wheel alignment on their Orbea Rise H10, resulting in wobbling or instability during rides.
• Cause of the problem: Wheel alignment issues can be caused by loose or improperly tightened axle nuts, misaligned dropouts, or bent wheel rims.
• Troubleshooting step-by-step:
  1. Check the axle nuts on both wheels to ensure they are properly tightened according to the manufacturer’s specifications.
  2. Inspect the dropouts and fork alignment for any signs of misalignment or damage and realign them if necessary using appropriate tools.
  3. Spin each wheel and observe for any wobbling or irregularities in wheel rotation, indicating potential issues with the wheel rim or spoke tension.
  4. If wheel alignment problems persist, seek assistance from a professional bike mechanic to diagnose and correct the underlying issue.

Chain Dropping – Orbea Rise H10

• Description of the problem: Riders may encounter issues with the chain dropping off the chainrings or cassette of their Orbea Rise H10, resulting in potential loss of power transmission and safety concerns.
• Cause of the problem: Chain dropping can occur due to improper chain tension, worn chainrings or cassette, misaligned derailleur, or chain suck.
• Troubleshooting step-by-step:
  1. Check the chain tension and adjust it to the manufacturer’s recommended specifications using the rear derailleur’s tension adjustment screws.
  2. Inspect the chainrings and cassette for signs of wear or damage, particularly in the teeth, and replace them if necessary to prevent chain dropping.
  3. Ensure proper alignment of the front and rear derailleurs with the chainrings and cassette respectively, and adjust them as needed to prevent chain misalignment.
  4. If chain suck is suspected as the cause, clean and lubricate the chain, cassette, and chainrings thoroughly to reduce friction and prevent sticking.

Handlebar Vibration – Orbea Rise H10

• Description of the problem: Some riders may experience excessive vibration in the handlebars of their Orbea Rise H10, leading to discomfort and fatigue during rides.
• Cause of the problem: Handlebar vibration can be caused by various factors, including uneven road surfaces, improper handlebar alignment, worn grips, or loose headset bearings.
• Troubleshooting step-by-step:
  1. Inspect the handlebar grips for signs of wear or damage, and replace them if necessary to improve grip and reduce vibration.
  2. Check the handlebar alignment and adjust it as needed to ensure it is parallel to the front wheel and properly centered within the stem clamp.
  3. Examine the headset bearings for proper adjustment and tightness, and tighten or replace them if loose to minimize handlebar wobbling and vibration.
  4. If riding on rough terrain, consider installing vibration-dampening handlebar tape or gel pads to absorb shock and reduce discomfort.

Saddle Discomfort – Orbea Rise H10

• Description of the problem: Some riders may experience discomfort or pain in the saddle area while riding their Orbea Rise H10, leading to reduced enjoyment and potential long-term health issues.
• Cause of the problem: Saddle discomfort can be caused by improper saddle fit, inadequate padding, saddle tilt or position, or personal anatomical factors.
• Troubleshooting step-by-step:
  1. Ensure the saddle is properly positioned and aligned with the bike frame, with the nose level or slightly tilted downward to prevent pressure on sensitive areas.
  2. Check the saddle height and adjust it to achieve proper leg extension and comfortable pedaling motion without excessive strain on the saddle area.
  3. If the saddle is too firm or lacks adequate padding, consider replacing it with a saddle that offers better cushioning and support for long rides.
  4. Experiment with different saddle designs, shapes, and widths to find one that suits your individual anatomy and riding style for maximum comfort.

Loose Spokes – Orbea Rise H10

• Description of the problem: Riders may notice loose or broken spokes on the wheels of their Orbea Rise H10, leading to wheel instability, wobbling, and potential safety hazards.
• Cause of the problem: Loose spokes can result from improper tensioning, wheel damage, or excessive stress during riding, leading to weakened spoke integrity and eventual failure.
• Troubleshooting step-by-step:
  1. Inspect the wheel spokes for proper tension and tighten any loose spokes using a spoke wrench, ensuring uniform tension across all spokes for optimal wheel strength and stability.
  2. Check the wheel rim for signs of damage, such as dents or cracks, and replace the rim if necessary to prevent further spoke issues and ensure safe riding conditions.
  3. If experiencing recurrent spoke problems, consider upgrading to stronger and more durable spokes or consulting with a professional wheel builder for expert advice and wheel customization.
  4. Regularly maintain and trues the wheels to keep them in optimal condition, and avoid riding over rough terrain or obstacles that may put excessive stress on the spokes.

Unresponsive Power Button – Orbea Rise H10

• Description of the problem: Some users may encounter issues with the power button of their Orbea Rise H10, where it becomes unresponsive or difficult to operate.
• Cause of the problem: This problem can be caused by dirt or debris accumulation around the power button, moisture ingress, or electrical faults in the button mechanism.
• Troubleshooting step-by-step:
  1. Clean the area around the power button thoroughly with a soft brush or compressed air to remove any dirt or debris that may be obstructing the button’s operation.
  2. Avoid exposing the power button to excessive moisture or water ingress by using a protective cover or avoiding riding in wet conditions.
  3. If the power button remains unresponsive, inspect the button mechanism for signs of damage or wear, and consider replacing it with a new button assembly if necessary.
  4. Consult with Orbea customer support or a certified bike mechanic for further diagnosis and repair if the power button issue persists despite cleaning and inspection efforts.

Brake Squeaking – Orbea Rise H10

• Description of the problem: Riders may notice squeaking or squealing noises coming from the brakes of their Orbea Rise H10, especially during braking maneuvers.
• Cause of the problem: Brake squeaking can occur due to contaminated brake pads, worn brake pads or rotors, misalignment of brake components, or insufficient brake pad toe-in.
• Troubleshooting step-by-step:
  1. Inspect the brake pads for any signs of contamination, such as oil or dirt buildup, and clean them thoroughly with rubbing alcohol or brake cleaner to restore proper braking performance.
  2. Check the brake pad and rotor surfaces for excessive wear or damage, and replace them if necessary to eliminate squeaking noises and ensure consistent braking performance.
  3. Ensure proper alignment of the brake calipers and brake pads with the rotor, and adjust as needed to prevent rubbing and squeaking during braking.
  4. Adjust the toe-in of the brake pads slightly by loosening the mounting bolts and angling the pads inward slightly towards the rotor, then retighten the bolts to reduce squealing noises.

Motor Overheating – Orbea Rise H10

• Description of the problem: Some users may encounter issues with the motor overheating on their Orbea Rise H10, leading to reduced power output and potential damage to the motor components.
• Cause of the problem: Motor overheating can be caused by prolonged use at high power levels, inadequate cooling airflow, ambient temperature extremes, or excessive load on the motor.
• Troubleshooting step-by-step:
  1. Avoid prolonged use of the motor at maximum power levels, and take breaks to allow the motor to cool down periodically during extended rides.
  2. Ensure proper airflow around the motor by keeping the motor vents clear of debris and avoiding obstructing the motor with accessories or gear.
  3. Limit riding in extreme temperature conditions, such as extremely hot or cold weather, as this can exacerbate motor overheating issues.
  4. Reduce the load on the motor by using lower power assist levels or pedaling more actively to minimize strain on the motor and prevent overheating.

Intermittent Power Cutouts – Orbea Rise H10

• Description of the problem: Riders may experience intermittent power cutouts or loss of pedal assist on their Orbea Rise H10, resulting in sudden drops in speed and power output.
• Cause of the problem: Intermittent power cutouts can be caused by loose electrical connections, battery issues, sensor malfunctions, or software glitches in the motor controller.
• Troubleshooting step-by-step:
  1. Inspect all electrical connections and wiring harnesses for tightness and secure them properly to ensure reliable power delivery and minimize power cutouts.
  2. Check the battery connections and terminals for any signs of corrosion or damage, and clean them thoroughly to ensure good electrical contact and prevent power loss.
  3. Test the sensors, including pedal assist and torque sensors, for proper functioning and replace any faulty sensors or wiring as needed to restore consistent power delivery.
  4. Update the motor controller firmware to the latest version provided by Orbea, as software glitches may be resolved through updates and improve system stability.

Display Freezing or Lagging – Orbea Rise H10

• Description of the problem: Some riders may experience issues with the display freezing or lagging on their Orbea Rise H10, leading to delayed or unresponsive feedback during rides.
• Cause of the problem: Display freezing or lagging can be caused by software glitches, insufficient processing power, or compatibility issues with other electronic components.
• Troubleshooting step-by-step:
  1. Restart the display unit by turning off the e-bike, disconnecting the battery, waiting for a few minutes, and then reconnecting the battery and powering on the bike to reset the display software.
  2. Check for any software updates available for the display unit or motor controller and install them according to the manufacturer’s instructions to address known issues and improve system stability.
  3. Ensure proper compatibility between the display unit and other electronic components, such as the motor controller and battery, and consult with Orbea customer support for assistance with troubleshooting and compatibility issues.
  4. If display freezing or lagging persists, consider replacing the display unit with a new unit or seek assistance from a professional bike mechanic for further diagnosis and repair.

Uneven Suspension Performance – Orbea Rise H10

• Description of the problem: Riders may notice uneven suspension performance on their Orbea Rise H10, with one or both suspension forks exhibiting inconsistent compression or rebound damping.
• Cause of the problem: Uneven suspension performance can be caused by air pressure imbalances, worn suspension seals or bushings, or internal damper issues in the suspension forks.
• Troubleshooting step-by-step:
  1. Check the air pressure settings in both suspension forks and adjust them to the manufacturer’s recommended specifications to ensure proper suspension performance and balance between the front and rear suspension.
  2. Inspect the suspension seals and bushings for signs of wear or damage, and replace them if necessary to prevent oil leakage and maintain consistent suspension performance.
  3. Service the suspension forks regularly by cleaning and lubricating the stanchions, replacing the suspension oil and seals, and performing any necessary adjustments or repairs to the internal damping components.
  4. If uneven suspension performance persists, consult with Orbea customer support or a certified suspension technician for further diagnosis and repair of the suspension forks.

Orbea Rise H10 Electric Bike User Reviews

Positive Reviews from Orbea Rise H10 Users

Here are some of the positive aspects of the Orbea Rise H10 electric bike highlighted by users:

• Some users were satisfied with the lightweight aluminum frame, which not only provided durability but also gave the bike a sleek and polished look.
• Many riders appreciated the 29-inch wheels, noting that they offered improved speed and stability, especially on rough terrain.
• Several users praised the powerful performance of the Shimano EP8-RS motor with the Orbea tune, particularly its climbing ability, rapid acceleration, and precise braking.
• Many riders found the choice of battery options impressive, with the 360 Wh and 540 Wh batteries, along with the optional 252 Wh range extender, providing ample power and extended riding range.
• Users appreciated the internal cable routing and tapered headtube, which contributed to the bike’s clean and streamlined appearance.
• Overall, the Orbea Rise H10 received positive feedback for its combination of high-performance components, sleek design, and reasonable price point, making it a top choice for riders looking for a versatile and reliable e-MTB.

Negative User Reviews of the Orbea Rise H10

Here are some of the summarized negative user reviews of the Orbea Rise H10:

• Some users were not satisfied with the seat tube and seat angle of the Orbea Rise H10, finding them too long and causing discomfort during rides.
• Several riders expressed disappointment with the weight of the Orbea Rise H10, noting that it is heavier than other lightweight e-bikes, which affected its maneuverability and agility.
• Many users were frustrated by the absence of a visible battery capacity indicator on the Orbea Rise H10, making it difficult to monitor battery usage and plan rides effectively.

Despite these negative aspects, the majority of users were satisfied with the overall performance, features, and value offered by the Orbea Rise H10 electric bike.

Orbea Rise H10 Manual

The operating instructions for the Orbea Rise H10 can be found on the manufacturer’s website.

Conclusion

Overall Performance: The Orbea Rise H10 electric bike offers impressive performance and versatility, with its lightweight aluminum frame, powerful motor, and excellent components. Riders can enjoy smooth rides on various terrains, thanks to features like the 29-inch wheels and 140mm rear wheel travel.

User Feedback: While there were some minor drawbacks reported by users, such as the seat tube length and absence of a visible battery capacity indicator, the majority of users were satisfied with the bike’s performance and features. Positive user reviews highlighted the bike’s sleek design, powerful motor, and reasonable price point.

Recommendation: Overall, the Orbea Rise H10 electric bike stands out as a top-of-the-line e-MTB that caters to both casual riders and avid mountain bikers. Its combination of performance, features, and value make it a compelling choice for those looking to elevate their riding experience.

Orbea Rise H10 FAQ